Fluke 434-II/BASIC

$3.121

In stock

Compare
SKU: 4116650 Category:
  • Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available)
  • Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp
  • PowerWave data capture: 435 and 437 Series II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.)
  • Waveform capture: 435 and 437 Series II models capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up
  • Automatic Transient Mode: 435 analyzers capture 200 kHz waveform data on all phases simultaneously up to 6 kV
  • Fully Class-A compliant: 435 Series II analyzers conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
  • Mains signaling: analyzers measure interference from ripple control signals at specific frequencies
  • 400 Hz measurement: 437 Series II analyzer captures power quality measurements for avionic and military power systems
  • Troubleshoot real-time: Analyze the trends using the cursors and zoom tools
  • Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance
  • Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places
  • Automatic Trending: Every measurement is always automatically recorded, without any set-up
  • System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard
  • Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals
  • View graphs and generate reports: With included analysis software

>

Each Unit Includes

  • BC430 Power Adapter
  • International plug adapter set
  • BP290 (Single capacity Li-ion battery) 28Wh (7 hours or more)
  • Leads TL430 Test lead and Alligator clip set
  • Color coding WC100 color coding clips and regional decals
  • 8 GB SD card (32GB optionally)
  • PowerLog on CD (includes operator manuals in PDF format)
  • USB cable A-Bmini
  • Carrying case C1740 Soft Case

Brand

Fluke

See It Styled On Instagram

    No access token

Main Menu